Flatbed Magnetic Separator

Brief introduction

Flat plate magnetic separator is commonly used in wet processing of non-metallic ore iron removal and purification, especially for quartz sand, potassium sodium feldspar and other non-metallic ores wet iron removal. It has good separation effect for hematite, limonite, specular iron ore, rhodochrosite, manganese ore, tantalum mud ore and other weak magnetic minerals.

Working Principle of Flat Plate Magnetic Separator:

The slurry enters into the uniform replenishment device of this magnetic separator through the feeding pipe, and after being fully dispersed, it is evenly sprinkled on the iron unloading belt on the upper part of the magnetic plate, and the slurry flows downward along the inclined direction of the magnetic plate under the effect of gravity, and the ferromagnetic materials contained in the slurry are firmly adsorbed on the iron unloading belt under the strong magnetic field, and the motor rotating device drives the iron unloading belt to move upward along the inclined direction of the magnetic plate and at the same time, it will bring the adsorbed ferromagnetic At the same time, the adsorbed ferromagnetic material will be brought into the iron unloading area, and will be washed into the tailing bucket by the iron unloading water pipe and collected centrally, while the non-magnetic slurry will continue to flow downward along the magnetic plate and flow into the concentrate bucket and be collected centrally.

Plate magnetic separator technical characteristics:

1. Adopting high performance NdFeB material, unique magnetic circuit design, the highest magnetic field on the surface can reach 15000GS.

2. Compared with other permanent magnetic separator, the magnetic field sweeping area is large, and the iron removal effect is good.

3. The slope of the plate surface is adjustable, and the best iron removal effect can be achieved by adjusting the slope according to the material condition.

4. The belt speed is adjustable by frequency conversion, and the belt speed can be adjusted according to the material condition to achieve better iron removal effect.

5. Adopting wear-resistant composite tape as the conveyor belt, which greatly increases the service life of the conveyor belt.

Technical parameters:

Flat plate magnetic separator application range:

The application range of flat plate magnetic separator is also very wide. In the mining industry, it can be used to separate the impurities in the magnetic ore and improve the quality of the ore. In the chemical, pharmaceutical, food and other industries, it can be used to separate iron, steel and other impurities in various powder and granular materials, the purity and quality of products.